2019. gads
Zhu, P., Brunner, S., Zhao, S., Griffa, M., Leemann, A., Toropovs, N., Malekos, A., Koebel, M., Lura, P. Study of Physical Properties and Microstructure of Aerogel-Cement Mortars for Improving the Fire Safety of High-Performance Concrete Linings in Tunnels (2019) Cement and Concrete Composites. DOI:10.1016/j.cemconcomp.2019.103414
Bumanis, G., Zorica, J., Bajare, D., Korjakins, A. Effect of Water-Binder Ratio on Properties of Phosphogypsum Binder (2019) IOP Conference Series: Materials Science and Engineering. DOI:10.1088/1757-899X/660/1/012071
Zhu, P., Brunner, S., Zhao, S., Griffa, M., Leemann, A., Toropovs, N., Malekos, A., Koebel, M., Lura, P. Study of Physical Properties and Microstructure of Aerogel-Cement Mortars for Improving the Fire Safety of High-Performance Concrete Linings in Tunnels (2019) Cement and Concrete Composites. DOI:10.1016/j.cemconcomp.2019.103414
Zimele, Z., Sinka, M., Korjakins, A., Bajare, D., Sahmenko, G. Life Cycle Assessment of Foam Concrete Production in Latvia (2019) Environmental and Climate Technologies. DOI:10.2478/rtuect-2019-0080
Vegere, K., Vitola, L., Argalis, P., Bajare, D., Krauklis, A. Alkali-Activated Metakaolin as a Zeolite-Like Binder for the Production of Adsorbents (2019) Inorganics. DOI:10.3390/inorganics7120141
Bajare, D., Vitola, L., Dembovska, L., Bumanis, G. Waste Stream Porous Alkali Activated Materials for High Temperature Application (2019) Frontiers in Materials. DOI:10.3389/fmats.2019.00092
Sinka, M., Bajare, D., Jakovics, A., Ratnieks, J., Gendelis, S., Tihana, J. Experimental Testing of Phase Change Materials in a Warm-Summer Humid Continental Climate (2019) Energy and Buildings. DOI:10.1016/j.enbuild.2019.04.030
Bumanis, G., Novais, R., Carvalheiras, J., Bajare, D., Labrincha, J. Metals Removal from Aqueous Solutions by Tailored Porous Waste-Based Granulated Alkali-Activated MaterialS (2019) Applied Clay Science. DOI:10.1016/j.clay.2019.105147
Dembovska, L., Bajare, D., Korjakins, A., Toma, D., Jakubovica, E. Preliminary Research for Long Lasting Self-Healing Effect of Bacteria-Based Concrete with Lightweight Aggregates (2019) IOP Conference Series: Materials Science and Engineering. DOI:10.1088/1757-899X/660/1/012034
Krivenko, P., Gelevera, O., Kovalchuk, O., Bumanis, G., Korjakins, A. Alkali-Aggregate Reaction in Alkali-Activated Cement Concretes (2019) IOP Conference Series: Materials Science and Engineering. DOI:10.1088/1757-899X/660/1/012002
Zimele, Z., Sinka, M., Bajare, D., Jakovics, A. Life Cycle Assessment for Masonry Exterior Wall Assemblies Made of Traditional Building Materials (2019)IOP Conference Series: Materials Science and Engineering. DOI:10.1088/1757-899X/660/1/012042
Moceikis, R., Kicaite, A., Sahmenko, G., Korjakins, A. Properties of Thin Wall Cement Composites Reinforced with AR Glass, Carbon and PVA Fibres (2019) IOP Conference Series: Materials Science and Engineering. DOI:10.1088/1757-899X/660/1/012038
2018. gads
Bumanis, G., Bajare, D. Porous Alkali Activated Materials with Slow Alkali Release Dynamic. Role of Composition.( 2018) Materiales de Construccion. DOI:10.3989/mc.2018.14016
Tsagarakis, K., Mavragani, A., Jurelionis, A., Prodan, I., Andrian, T., Bajāre, D., Korjakins, A., Magelinskaite-Legkauskienė, S., Razvan, V., Stasiuliene, L. Clean vs. Green: Redefining Renewable Energy (2018) Renewable Energy. DOI:10.1016/j.renene.2018.01.020
Bumanis, G., Bajare, D. Porous Alkali Activated Materials with Slow Alkali Release Dynamic. Role of Composition (2018) Materiales de Construccion. DOI:10.3989/mc.2018.14016
Dembovska, L., Pundiene, I., Bajare, D., Bumanis, G. Effect of the Ratio SiO2/Al2O3 on the Structure, Properties, and Thermal Stability of Geopolymer Refractory Materials (2018) Glass and Ceramics. DOI:10.1007/s10717-018-0039-0
Mechtcherine, V., Snoeck, D., Schröfl, C., De Belie, N., Klemm, A., Ichimiya, K., Moon, J., Wyrzykowski, M., Lura, P., Toropovs, N., Assmann, A., Igarashi, S., De La Varga, I., Almeida, F., Erk, K., Ribeiro, A., Custodio, J., Reinhardt, H., Falikman, V. Testing Superabsorbent Polymer (SAP) Sorption Properties Prior to Implementation in Concrete: Results of a RILEM Round-Robin Test (2018) Materials and Structures = Materiaux et Constructions. DOI:10.1617/s11527-018-1149-4
Dembovska, L., Pundiene, I., Bajare, D., Bumanis, G. Effect of the Ratio SiO2/Al2O3 on the Structure, Properties, and Thermal Stability of Geopolymer Refractory Materials (2018) Glass and Ceramics. DOI:10.1007/s10717-018-0039-0
De Belie, N., Gruyaert, E., Al-Tabbaa, A., Antonaci, P., Baera, C., Bajare, D., Darquennes, A., Davies, R., Ferrara, L., Jefferson, T., Litina, C., Miljevic, B., Otlewska, A., Ranogajec, J., Roig-Flores, M., Paine, K., Lukowski, P., Serna, P., Tulliani, J., Vucetic, S., Wang, J., Jonkers, H. A Review of Self-Healing Concrete for Damage Management of Structures (2018) Advanced Materials Interfaces. DOI:10.1002/admi.201800074
Sliseris, J. Numerical Analysis of Reinforced Concrete Structures with Oriented Steel Fibers and Re-Bars (2018) Engineering Fracture Mechanics. DOI:10.1016/j.engfracmech.2018.03.017
Sinka, M., Korjakins, A., Bajare, D., Zimele, Z., Sahmenko, G. Bio-Based Construction Panels for Low Carbon Development (2018) Energy Procedia. DOI:10.1016/j.egypro.2018.07.063
Singh, A., Shiskins, A., Koppel, T., Gupta, N. A Review of Porous Lightweight Composite Materials for Electromagnetic Interference Shielding (2018) Composites. Part B: Engineering. DOI:10.1016/j.compositesb.2018.05.027
Moukannaa, S., Loutou, M., Benzaazoua, M., Vitola, L., Hakkou, R., Alami, J. Recycling of Phosphate Mine Tailings for the Production of Geopolymers (2018) Journal of Cleaner Production. DOI:10.1016/j.jclepro.2018.03.094
Bumanis, G., Zorica, J., Bajare, D., Korjakins, A. Technological Properties of Phosphogypsum Binder Obtained from Fertilizer Production Waste (2018) Energy Procedia. DOI:10.1016/j.egypro.2018.07.096
Shiskins, A., Hussainova, I., Kozlov, V., Lisnanskis, M., Leroy, P., Lehmhus, D. Metal-Coated Cenospheres Obtained via Magnetron Sputter Coating: A New Precursor for Syntactic Foams (2018) The Journal of The Minerals, Metals & Materials Society. DOI:10.1007/s11837-018-2886-0
Pundiene, I., Korjakins, A., Pranckeviciene, J., Kligys, M. Effect of Silicon Carbide Aggregate, Prepared by Different Methods, on the Properties of Refractory Concrete with Cenospheres (2018) Ceramics International. DOI:10.1016/j.ceramint.2018.06.015
Sahmenko, G., Namsone, E., Rubenis, K., Dubnika, A., Niparts, G. Effect of Various Additives and Aeration on the Properties of Lightweight Concrete (2018) Key Engineering Materials. DOI:10.4028/www.scientific.net/KEM.762.351
Sinka, M., Bajare, D., Gendelis, S., Jakovics, A. In-situ Measurements of Hemp-Lime Insulation Materials for Energy Efficiency Improvement 2018) Energy Procedia. DOI:10.1016/j.egypro.2018.07.088
Bumanis, G., Dembovska, L., Korjakins, A., Bajare, D. Applicability of Freeze-Thaw Resistance Testing Methods for High Strength Concrete at Extreme −52.5 °C and Standard −18 °C Testing Conditions (2018) Case Studies in Construction Materials. DOI:10.1016/j.cscm.2018.01.003
2017. gads
Mechtcherine, V., Schröfl, C., Wyrzykowski, M., Gorges, M., Lura, P., Cusson, D., Margeson, J., De Belie, N., Snoeck, D., Ichimiya, K., Igarashi, S., Falikman, V., Friedrich, S., Bokern, J., Kara, P., Marciniak, A., Reinhardt, H., Sippel, S., Bettencourt Ribeiro, A., Custódio, J., Ye, G., Dong, H., Weiss, J. Effect of Superabsorbent Polymers (SAP) on the Freeze-Thaw Resistance of Concrete: Results of a RILEM Interlaboratory Study. Materials and Structures, 2017, Vol.50, pp.1-19. ISSN 1359-5997. e-ISSN 1871-6873. Available from: doi:10.1617/s11527-016-0868-7
Namsone, E., Šahmenko, G., Korjakins, A. Durability Properties of High Performance Foamed Concrete. Procedia Engineering, 2017, Vol.172, pp.760-767. ISSN 1877-7058. Available from: doi:10.1016/j.proeng.2017.02.120
Vaganov, V., Popov, M., Korjakins, A., Šahmenko, G. Localization of Alkali-Silica Reactions in Lightweight Concrete with Granulated Foam Glass Using CNT. Procedia Engineering, 2017, Vol.172, pp.1204-1211. ISSN 1877-7058. Available from: doi:10.1016/j.proeng.2017.02.141
2016. gads
Coppola, L., Kara, P., Lorenzi, S. Concrete Manufactured with Crushed Asphalt as Partial Replacement of Natural Aggregates. Materiales de Construcción, 2016, Vol.66, Iss.324, pp.e101-e101. ISSN 1988-3226. Available from: doi:10.3989/mc.2016.06515
Coppola, L., Buoso, A., Coffetti, D., Kara, P., Lorenzi, S. Electric Arc Furnace Granulated Slag for Sustainable Concrete. Construction and Building Materials, 2016, Vol.123, pp.115-119. ISSN 0950-0618. Available from: doi:10.1016/j.conbuildmat.2016.06.142
Kara, P., Csetényi, L., Borosnyói, A. Performance Characteristics of Waste Glass Powder Substituting Portland Cement in Mortar Mixtures. IOP Conference Series: Materials Science and Engineering, 2016, Vol.123, Iss.1, pp.012057-012057. ISSN 1757-8981. e-ISSN 1757-899X. Available from: doi:10.1088/1757-899X/123/1/012057
Coppola, L., Lorenzi, S., Garlati, S., Kara, P. The Rheological and Mechanical Performances of Concrete Manufactured with Blended Admixtures Based on Phosphonates. Key Engineering Materials: Engineering Materials and Tribology, 2016, Vol.674, pp.159-164. ISSN 1013-9826. e-ISSN 1662-9795.
2015. gads
Justs, J., Wyrzykowski, M., Bajāre, D., Lura, P. Internal Curing by Superabsorbent Polymers in Ultra-High Performance Concrete. Cement and Concrete Research, 2015, Vol.76, pp.82-90. ISSN 0008-8846. Available from: doi:10.1016/j.cemconres.2015.05.005
Kara, P. Performance of Lamp Glass Waste Powder (LGWP) as Supplementary Cementitious Material (SCM) – Viscosity and Electrical Conductivity. Építőanyag – Journal of Silicate Based and Composite Materials, 2015, Iss.1, pp.12-18. ISSN 0013-970X. e-ISSN 2064-4477. Available from: doi:10.14382/epitoanyag-jsbcm.2015.3
Balčiūnasa, G., Pundiene, I., Lekūnaite-Lukošiūne, L., Vejelis, S., Korjakins, A. Impact of Hemp Shives Aggregate Mineralization on Physical–Mechanical Properties and Structure of Composite with Cementitious Binding Material. Industrial Crops and Products, 2015, Vol.77, pp.724-734. ISSN 0926-6690.
2014. gads
Kara, P., Korjakins, A. High Efficiency Ecological Concrete. Key Engineering Materials, 2014, Vol.604, pp.157-160. ISSN 1013-9826. e-ISSN 1662-9795. Available from: doi:10.4028/www.scientific.net/KEM.604.157
Kara, P. Recycling of Glass Wastes in Latvia – Its Application as Cement Substitute in Self-Compacting Concrete. Journal of Sustainable Architecture and Civil Engineering, 2014, 1(6), pp.42-49. ISSN 2029-9990. e-ISSN 2335-2000. Available from: doi:10.5755/j01.sace.6.1.6127
Justs, J., Wyrzykowski, M., Winnefeld, F., Bajāre, D., Lura, P. Influence of Superabsorbent Polymers on Hydration of Cement Pastes with Low Water-to-Binder Ratio. Journal of Thermal Analysis and Calorimetry, 2014, Vol.115, iss.1, pp.425-432. ISSN 1388-6150. e-ISSN 1572-8943. Available from: doi:10.1007/s10973-013-3359-x
Kara, P., Borosnyói, A., Fenyvesi, O. Performance of Waste Glass Powder (WGP) Supplementary Cementitious Material (SCM) – Drying shrinkage and early age shrinkage cracking. Journal of Silicate Based and Composite Materials, 2014, 66 (1), pp.18-22. ISSN 0013-970x. e-ISSN 2064-4477. Available from: doi:10.14382/epitoanyag-jsbcm.2014.4
Būmanis, Ģ., Bajāre, D., Ločs, J. The Effect of Activator on the Properties of Low-Calcium Alkali-Activated Mortars. Key Engineering Materials, 2014, Vol.604, pp.169-172. ISSN 1662-9795. Available from: doi:10.4028/www.scientific.net/KEM.604.169
Ruģele, K., Būmanis, Ģ., Bajāre, D., Lakevičs, V., Rubulis, J. Alkaline Activated Material for pH Control in Biotechnologies. Key Engineering Materials, 2014, Vol.604, pp.223-226. ISSN 1662-9795. Available from: doi:10.4028/www.scientific.net/KEM.604.223
Toropovs, N., Bajāre, D., Šahmenko, G., Krāģe, L., Korjakins, A. The Formation of Microstructure in High Strength Concrete Containing Micro and Nanosilica. Key Engineering Materials, 2014, Vol.604, pp.83-86. ISSN 1662-9795. Available from: doi:10.4028/www.scientific.net/KEM.604.83
Kazjonovs, J., Vecstaudža, J., Ločs, J., Bajāre, D., Korjakins, A. An Assessment of the PCM/Timber Composite in Buildings. Key Engineering Materials, 2014, Vol.604, pp.227-231. ISSN 1662-9795. Available from: doi:10.4028/www.scientific.net/KEM.604.227
Pundiene, I., Mironovs, V., Korjakins, A., Spudulis, E. Investigation of Hydration Features of the Special Concrete with Aggregates of Various Metal Particles. Key Engineering Materials, 2014, Vol.604, pp.297-300. ISSN 1662-9795. Available from: doi:10.4028/www.scientific.net/KEM.604.297
Korjakins, A., Upeniece, L., Tomase, L. Obtaining Porous Ceramics Using Shredded Paper and Foamglass Pellets. Journal of Sustainable Architecture and Civil Engineering, 2014, 6, pp.75-82. ISSN 2029-9990. e-ISSN 2335-2000