Untitled Document

Publikācijas



2015

Barkanov E., Beschetnikov D., Lvov G. Effect of Technological Tensioning on the Efficiency of Reinforcement of Pipelines with Composite Bands // Mechanics of Composite Materials.- Vol. 50, (2015), Iss.6. pp 725-732 (SCOPUS).

Barkanov E., Wesolowski M., Hufenbach W., Dannemann M. An Effectiveness Improvement of the Inverse Technique Based on Vibration Tests // Computers and Structures.- Vol. 146 (2015), pp 152-162 (SCOPUS).

Barkanov E., Akishin P. Characterisation of Mechanical Properties of Nano composites by NDT // In: Proceedings of the XXX International Conference “NDT 2015”, Sozopol, Bulgaria, 15. - 19. June, 2015. pp 87-93.

Rucevskis S., Akishin P., Chate A. Numerical and Experimental Study on the Aplication of Mode Shape Curvature for Damage Detection in Plate-Like Structures // Solid State Phenomena.- Vols. 220 -221, (2015) pp. 264-270.

Rucevskis S., Sumbatyan M.A., Akishin P., Chate A. Tikhonov’s Regularization approach in Mode Shape Curvature Analysis applied to Damage Detection // Mechanics Research Communications.- Vol. 65, (2015) pp. 9-16 (SCOPUS).

Auzins J., Chate A., Rikards R., Skukis E. Metamodeling and Robust Minimization Approach for the Identification of Elastic Properties of Composites by Vibration Method // ZAMM.- Vol. 95, Iss.10. (2015) pp 1012-1026 / DOI 10.1002/zamm.201500008 (SCOPUS).

Sergienko V. P., Bukharov S. N., Kozhushko V. V., Alexiev Al., Mirchev Y., Barkanov E. Development of New Environmental Safety Sound-Absorbing Materials and Layered Sound-Proofing Structures for Transport Taking into Account the Spectral Characteristics of the NOISE // In: Proceedings of the XXX International Conference “NDT 2015”, Sozopol, Bulgaria, 15. - 19. June, 2015. pp 469-473.

Barkanov E., Akishin P., Miazza N. L., Galvez S. Numerical Simulation of Pultrusion Processes: Algorithms’’ Comparative Study // In: Proceedings of the 10th International Conference on Composite Science and Technology, Lisbon, Portugal, 2.-4. September, 2015, 12 pages.

Janeliukstis R., Rucevskis S., Wesolowski M., Kovalovs A., Chate A. Damage Identification in Beam Structure using Spatial Continuous Wavelet Transform // IOP Conf. Series: Materials Science and Engineering.- Vol. 96, (2015), 14 pages / doi:10.1088/1757-899X/96/1/012058.

Wesolowski M., Rucevskis S., Janeliukstis R., Polanski M. Damping Properties of Sandwich Truss Core Structures by Strain Energy Method // IOP Conf. Series: Materials Science and Engineering.- Vol. 96, (2015), 8 pages / doi:10.1088/1757-899X/96/1/012022.

Akishin P., Barkanov E., Bondarchuk A. Finite Element Modelling and Analysis of Conventional Pultrusion Processes // IOP Conf. Series: Materials Science and Engineering.- Vol. 96, (2015), 10 pages / doi:10.1088/1757-899X/96/1/012012.

Sable L., Japins G., Kalnins K. Evaluation of Behaviours of Laminated Glass // IOP Conf. Series: Materials Science and Engineering.- Vol. 96, (2015), 8 pages / doi:10.1088/1757-899X/96/1/012077.

Janeliukstis R., Rucevskis S., Wesolowski M., Chate A., Kovalovs A. Damage identification in Beam Structure using Mode Shape Data: From Spatial Continuous Wavelet Transform to Mode Shape Curvature Methods // In: Proceedings of ICoEV15 “International Conference on Engineering Vibration”, Ljubljana, Slovenia, 7.-10. September, 2015, pp 288-297.

Auzins J., Skukis E. Robust Optimization approach for Mixed Numerical/Experimental Identification of Elastic Properties of Orthotropic Composite Plates // In: Proceedings of the 6th International Conference on Coupled Problems in Science and Engineering: COUPLED PROBLEMS 2015, Venice, Italy, 18.-20. May, 2015, pp 859-870 (SCOPUS).

Sable L., Skuķis E., Japiņš G., Kalniņš K. Inverse Technique for the Glass Stiffness Characterization // In: Proceedings of the 3nd International Conference “Optimization and Analysis of Structures (OAS 2015), Vol. III, Tartu, Estonia, 23.-25. August, 2015, pp 110-116.

Labans E., Jekabsons G., Kalniņš K., Zudrags K., Rudzite S., Kirpluks M., Cabulis U. Evaluation of Plywood Sandwich Panels with Rigid PU Foam-Cores and Various Configurations of Stiffeners // In: Proceedings of the 3nd International Conference “Optimization and Analysis of Structures (OAS 2015), Vol. III, Tartu, Estonia, 23.-25. August, 2015, pp 45-51.

Sable L., Skukis E., Kalnins K. Estimation of Young’s Modulus of Glass by Direct and Inverse Approach // In: 13th Students’ Science Conference, Polanica Zdroj, Poland, 17.-20. September, 2015, pp 322-327.

Sable L., Skukis E., Kalnins K. Finite Element Analysis of Laminated Glass Plates with EVA Interlayer // In: Proceedings of 28th Nordic Seminar on Computational Mechanics (NSCM28), Tallinn, Estonia, 22.-23. October, 2015, pp 147-150.

Gluhih S., Kovalovs A., Cate A. Determining the Modulus of Elasticity for Polymer Materials by Numerical Testing Thin-Walled Double-Layer Circular Shells // Advanced Structured Materials. – Vol. 45, (2015), pp 213-222 (SCOPUS).

Jelinska N., Kalnins M., Kovalovs A., Chate A. Design of the Elastic Modulus of Nanoparticles-Containing PVA/PVAc Films by the Response Surface Method // Mechanics of Composite Materials. - Vol. 51, Iss. 5. (2015), pp 669-676.(SCOPUS).

Labans E., Kalniņš K., Lefort P., Dufour C., Trumper W., Callin T. Implementing of the optimized truck seat plate made of thermoplastic GF/PP composite // In: Proceedings of the 20th International Conference on Composite Materials, Copenhagen, Denmark, 19.-24. July, 2015. 10. Pages (on CD).

Labans E., Kalnins K., Zudrags K., Rudzite S. High-Performance Plywood/GF/PP Textile Composite Sandwich Panels Developed During MAPICC 3D Project // In: Proceedings of the 5th International conference on Intelligent Textiles and Mass Customization, Casablanca, Morocco, 4. -6. November, 2015. 9.pages (on CD).

Arbelo M.A., Kalnins K., Ozolins O., Skukis E., Castro S.G.P., Degenhardt R. Experimental and Numerical Estimation of Buckling Load on Unstiffened Cylindrical Shells using a Vibration Correlation Technique // Thin-Walled Structures. – Vol. 94, (2015), pp 273-279 (SCOPUS), doi:10.1016/j.tws.2015.04.024.

Kalnins K., Arbelo M.A., Ozolins O., Skukis E., Castro S.G.P., Degenhardt R. Experimental Nondestructive Test for Estimation of Buckling Load on Unstiffened Cylindrical Shells using a Vibration Correlation Technique // Shock and Vibration. – (2015), pp 273-279 (SCOPUS), doi:10.1155/2015/729684.

Mironov A., Doronkin P., Priklonsky A., Chate A. Effectiveness of Application of Modal Analysis for Monitoring of Stressed or Operated Structures // Aviation.- Vol. 19, Iss. 3, (2015), pp 112-122, doi:10.3846/16487788.2015.1104860.

Thesis/Abstracts of International Conferences (2015)



2014

Akishin P. Y., Barkanov E. N., Wesolowski M., Kolosova E. M. Static and Dynamic Techniques for Non-Destructive Elastic Material Properties Characterisation // In: CD-ROM Proceedings of the XLII Summer School-Conference “Advanced Problems in Mechanics”, St. Petersburg, Russia, 30. June – 5. July, 2014. - pp 164-176.

Barkanov E. N., Chebakov M. I. Inverse Technique for Characterisation of Elastic and Dissipative Properties of Materials Used in a Composite Repair of Pipelines // In: CD-ROM Proceedings of the XLII Summer School-Conference “Advanced Problems in Mechanics”, St. Petersburg, Russia, 30. June – 5. July, 2014. - pp 232-246.

Barkanov E. Characterisation of Adhesive Material Properties via an Inverse Technique // In: Proceedings of the XXIX International Conference “NDT 2014”, Sozopol, Bulgaria, 9. - 17. June, 2014. - pp 510-514.

Skukis E., Kalnins K., Chate A. Preliminary Assessment of Correlation Between Vibration and Buckling Load of Stainless Steel Cylinders // Shell Structures: Theory and Applications.- Vol.3, CRC press, London: Taylor & Francis, 2014, pp 325-328 (SCOPUS).

Labans E., Kalnins K., Zudrags K. Stiffness Analysis of Sandwich Panels with Corrugated Plywood and GFRP Core // Shell Structures: Theory and Applications.- Vol.3, CRC press, London: Taylor & Francis, 2014, pp 539-542 (SCOPUS).

Wesolowski, M., Barkanov E. Improving an Inverse Technique for Characterisation of Laminated Plates // Shell Structures: Theory and Applications.- Vol.3, CRC press, London: Taylor & Francis, 2014, pp 157-160 (SCOPUS).

Rucevskis S., Akishin P., Chate A., Kovalovs A. Vibration-Based Damage Detection in Plate Structure without Baseline Modal Parameters // In: Proceedings of the 6th World Conference on Structural Control and Monitoring , 15 – 17 July, 2014, Barcelona, Spain, 15.-17. July, 2014, 6 pages.

Barkanov E., Ozoliņš O., Eglītis E., Almeida F., Bowering M. C., Watson G. Optimal Design of Composite Lateral Wing Upper Covers. Part I: Linear Buckling Analysis // Aerospace Science and Technology. - Vol.38, (2014) pp 1-8 (SCOPUS).

Auzins J., Janushevskis A., Janushevskis J., Skukis E. Software EDAOpt for Experimental Design, Analysis and Multiobjective Robust Optimization // In: Proceedings OPT-I 2014 – 1st International Conference on Engineering and Applied Science Optimization, Kos Island, Greece, 4.-6. June, 2014. - pp 1055-1077 (SCOPUS).

Kalnins K., Ozoliņš O., Arbelo M.A., Degenhardt R., Castro S.G.P. Verification study on Buckling Behaviour of Composite Cylinder with Eccentric Suports // 54th Israel Annual Conference on Aerospace Sciences, TelAvviv/Haifa, Israel, 19.-20. February, 2014. – pp 1216-1221 (SCOPUS).

Akišins P., Kovaļovs A., Kulakov V., Arnautov A. Finite Element Modelling of Slippage between FRP Rebar and Concrete in Pull-Out Test // In: Proceedings of the International Conference „Innovative Materials, Structures and Technologies”, Riga, Latvia, 8. November, 2013. Riga, RTU Press, 2014, - pp 6-11.

Kulakov V., Terrasi G., Portnov G., Arnautov A. Kovalovs A. Fastening of a Higstrength Composite Rod with a Splitted and Wedged End in a Potted Anchor 2. Finite Element Analysis // Mechanics of Composite Materials. - Vol. 50, Iss. 1. (2014), pp 39-50 (SCOPUS).

Labans E., Kalniņš K., Lefort P. Weight Optimization of of the Truck Cabin Part from Thermoplastic Composites // In: Proceedings 10th ASMO UK/ ISSMMO Conference on Engineering Design Optimization Product and Process Improvement, Delft, Nederland, 30. June – 01. July, 2014. – 6 Pages (on CD).

Labans, E., Kalniņš, K. Experimental Validation of the Stiffness Optimisation for Plywood Sandwich Panels with Rib-Stiffened Core // Wood Research. - Vol.59, Iss.4, (2014) pp 793-802. ISSN 1336-4561.

Arbelo M.A., De Almeida S.F.M., Donadon M.V., Rett S.R., Degenhardt R., Castro S.G.P., Kalnins K., Ozoliņš O.Vibration Correlation Technique for the Estimation of real Bondary Conditions and Buckling Load on Unstiffened Plates and Cylindrical Shells // Thin-Waled Structures. – Vol. 94, (2015) pp 119-128 (SCOPUS), doi:10.1016/j.tws.2015.02.006.

Thesis/Abstracts of International Conferences (2014)



2013

Ručevskis S., Chate A. Damage Identification in a Plate-like Structure using Modal Data // Aviation. – Vol.17, Iss.2. (2013) pp 45-51 (SCOPUS).

Kovolovs A., Gluhihs S., Chate A. Young’s Modulus Identification by using Cylindrical Specimens // Key Engineering Materials. – Vol.559 (2013) pp 75-79 (SCOPUS).

Akishin P., Aniskevich A., Aniskevich K., Kulakov V. Numerical Modeling of Heat Transfer in an Orthotropic I-Beam // Mechanics of Composite Materials. - Vol.49, Iss.3. (2013) pp 267-276 (SCOPUS).

Barkanov E., Eglītis E., Almeida F. Browering M.C., Watson G. Optimal Design of Composite Upper Covers of Lateral Wings with the Effect of Rib Attachment to Stiffener Webs // Mechanics of Composite Materials. - Vol.49, Iss.3. (2013) pp 285-296 (SCOPUS).

Skukis E., Kalnins K., Chate A. Preliminary Assessment of Correlation Between Vibrations and Buckling Load of Stainless Steel Cylinders // In: W. Pietraszkiewicz and J. G?rski (Eds.), Shell Structures: Theory and Applications, Proceedings of the 10th SSTA Conference, Poland, Gda?sk, 16.-18. October, 2013. - CRC press, London: Taylor & Francis, 2014, pp 325-328 (SCOPUS).

Labans E., Kalnins K., Zudrags K. Stiffness Analysis of Sandwich Panels with Corrugated Plywood and GFRP Core // In: W. Pietraszkiewicz and J. G?rski (Eds.), Shell Structures: Theory and Applications, Proceedings of the 10th SSTA Conference, Poland, Gda?sk, 16.-18. October, 2013. - CRC press, London: Taylor & Francis, 2014, pp 539-542 (SCOPUS).

Wesolowski, M., Barkanov E. Improving an Inverse Technique for Characterisation of Laminated Plates // In: W. Pietraszkiewicz and J. G?rski (Eds.), Shell Structures: Theory and Applications, Proceedings of the 10th SSTA Conference, Poland, Gda?sk, 16.-18. October, 2013. - CRC press, London: Taylor & Francis, 2014, pp 157-160 (SCOPUS).

Gluhih S., Kovalovs A., Chate A. Identification of the Elastic Modulus of Polymeric Materials Based on Compression of Thin-Walled Cylindrical Specimens // In: Proceedings of the International Scientific Conference “Shell and Membrane Theories in Mechanics and Biology – SMT in MB 2013”, Belarus, Minsk, 16.-20. September, 2013. – pp 253-256.

Akishin P., Kovalovs A., Barkanov E. Non-Destructive Tecnique for Determination of Elastic Material Properties // Scientific Proceedings of Riga Technical University, Construction Science, Vol.14, 2013, RTU press, pp 13-19.

Skukis E., Labans E., Kalnins K., Trumper W. Identification of Mechanical Properties for Knitted GF/PP Textile Composite // In: Proceedings of the AUTEX 2013 Conference „13th AUTEX World Textile Conference 2013”, Germany, Dresden, 22.-24. May, 2013. Dresden: 2013, pp1-7 (CD-ROM, ISBN 9783867803434).

Labans E., Kalnins K., Lefort P. Topology Optimization of Trucks Cabin Reinforcement Seat Plate from Woven Thermoplastic Composites // In: Proceedings of the AUTEX 2013 Conference “13th AUTEX World Textile Conference 2013”, Germany, Dresden, 22.-24. May, 2013. Dresden: 2013, pp1-6 (CD-ROM, ISBN 9783867803434).

Auzins J., Labans E., Kalnins K., Prieditis R., Melnikovs A. Metamodel Building on the Basis of Globally Weighted High Order Polynomials // In: Proceedings of the 10th World Congress on Structural and Multidisciplinary Optimization “10th World Congress on Structural and Multidisciplinary Optimization”, United States of America, Orlando, 19.-24. May, 2013. Orlando: 2013, pp 1-10 (CD-ROM).

Auzins J., Skukis E., Kalnins K., Lefort P., Laure B., Trumper W. Identification on Mechanical Properties for Knitted GF/PP Textile Composites // In: Proceedings of the 11th International Conference on Vibration Problems, Z. Dimitrovova et al.(eds.), Portugal, Lisbon, 9.-12. September, 2013, pp 1-10 (CD-ROM, ISN:978-989-96264-4-7).

Hufenbach W., Höhne R., Kostka P., Langkamp A., Ručevskis S., Akishin P. Experimental and Numerical Investigations of the Damage-Dependent Vibration Behaviour of Textile Reinforced Composite Structures // In: Proceedings of the International Conference on Structural Engineering Dynamics (ICEDyn 2013), Portugal, Sesimbra, 17.-19. June, 2013. Lisbon: 2013, pp 1-8 (CD-ROM).

Auziņš J., Skukis E., Kalnins K., Priedtis R. Accuracy Analysis of Vibration-Based Identification of Elastic Parameters // In: Proceedings of the 2nd International Conference “Optimization and Analysis of Structures (eds. J.Lellep, E.Puman) – OAS 2013”, Estonia, Tartu, 25.-27. August, 2013. University of Tartu Press, 2013, pp 17-23 (ISSN 2079-2093).

Labans E., Kalnins, K. Investigation of Wood Based Panels with Plywood and GFRP Composite Components // In: Proceedings of the 4th International Conference Civil Engineering’13, Structural Engineering, Vol. 4, Part I, Latvia, Jelgava, 16.-17. May, 2013. Jelgava: LLU, 2013, pp 69-74 (ISSN 2255-7776).

Skukis E., Kalnins K., Ozolinsh O. Assessment of Effect of Boundary Conditions on Cylindrical Shell Modal Responses // In: Proceedings of the 4th International Conference Civil Engineering’13, Structural Engineering, Vol. 4, Part I, Latvia, Jelgava, 16.-17. May, 2013. Jelgava: LLU, 2013, pp 41-45 (ISSN 2255-7776).

Sable L., Kalnins K. Evaluation of Glass in Design of Load Bearing Structures // In: Proceedings of the 4th International Conference Civil Engineering’13, Structural Engineering, Vol. 4, Part I, Latvia, Jelgava, 16.-17. May, 2013. Jelgava: LLU, 2013, pp 46-52 (ISSN 2255-7776).

Kovalovs A., Portnov G., Kulakov A., Arnautov A., Lackey E. Analysis of Interfacial Stresses Between Composite Rebar and Concrete // In: Proceedings of the 4th International Conference Civil Engineering’13, Structural Engineering, Vol. 4, Part I, Latvia, Jelgava, 16.-17. May, 2013. Jelgava: LLU, 2013, pp 86-90 (ISSN 2255-7776).

Masonkina M., Kalnins K. Application of Ultrasonic Imaging Technique as Structural Health Monitoring Tool for Assessment of Defects in Glass Fiber Composite Structures // In: Proceedings of the 4th International Conference Civil Engineering’13, Structural Engineering, Vol. 4, Part I, Latvia, Jelgava, 16.-17. May, 2013. Jelgava: LLU, 2013, pp 180-184 (ISSN 2255-7776).

Patent
S. Gluhihs, M. Kalniņš, V. Beresņevičs. LR patents Nr. 14681 „Polimēra materiāla elastības moduļa noteikšanas paņēmiens”. Akceptēts Latvijas Republikas Patentu valdē, 15.03.2013., Nr. P-13-34 (Method for determination of elasticity modulus of polymer materials. S.Gluhihs, M. Kalnins, V. Beresnevich. Patent LV 14681, Republic of Latvia, applied on 15.03.2013. [Application P-13-34; published on 20.07.2013. In: Patenti un preču zīmes, 2013, No.5, p. 549 – 550.]).

Thesis/Abstracts of International Conferences (2013)



2012

Bledzki A., Kirschling H., Rohleder M., Chate A. Correlation between Injection Moulding Processing Parameters and Mechanical Properties of Microcellular Polycarbonate // Journal of Cellular Plastics. - Vol.48, Iss.4. (2012) pp 301-340 (SCOPUS).

Wesolowski M., Barkanov E. Model Errors Influence on Identified Composite Material Properties // Composite Structures. - Vol.94, Iss.9. (2012) pp 2716-2723 (SCOPUS).

Koutsawa Y., Azoti W., Belouettar S., Martin R., Barkanov J. Loss Behavior of Viscoelastic Sandwich Structures: a Statistical-Continuum Multi-Scale Approach // Composite Structures. - Vol.94, Iss.4. (2012) pp 1391-1397 (SCOPUS).

Nasser H., Kiefer-Kamal E.-H., Hu H., Belouettar S., Barkanov J. Active Vibration Damping of Composite Structures Using a Nonlinear Fuzzy Controller // Composite Structures. – Vol.94, Iss.4. (2012) pp 1385-1390 (SCOPUS).

Gluhih S., Kovaļov A., Tishkunov A., Akishin P., Chate A., Auzinsh E., Kalninsh M. Identification of the Elastic Modulus of Polymeric Materials by Using Thin-Walled Cylindrical Specimens // Mechanics of Composite Materials. - Vol.48, Iss.1. (2012) pp 57-64 (SCOPUS).

Hufenbach W., Böhm R., Gude M., Berthel M., Hornig A., Ručevskis S., Andrich M. A Test Device for Damage Characterisation of Composites Based on in Situ Computed Tomography // Composites Science and Technology. - Vol.72, Iss.12. (2012) pp 1361-1367 (SCOPUS).

Krasnikovs A., Kononova O., Machanovskis A., Zaharevskis V., Akishins P., Ruchevskis S. Mechanical Properties Characterization for Composite Reinforced by Knitted Fabric Using Inverse Technique. Part 2: Mechanical Properties Experimental Evaluation by Frequency Eigenvalues Method // Journal of Vibroengineering. - Vol.14, Iss.2. (2012) pp 691-698 (SCOPUS).

Auzins E., Gluhih S., Jelinska N., Cerpakovska D., Kalnins M. Determination of Stress-Strain Characteristics of Thin Polymer Films on Cylindrical Specimens // Proceedings of the Estonian Academy of Sciences. - Vol.61, Iss.3. (2012) pp 166-171 (SCOPUS).

Gintalas M., Ziliukas A., Kalnins K. Dynamic J-Integral Evaluation of Three-Point-Bend Beams with Various Geometrical Dimensions // Key Engineering Materials. – Vol.488-489, (2012) pp 630-633 (SCOPUS).

Kalnins K., Graham A.J., Sinnema G. Verification of Residual Strength Properties from Compression after impact Tests on Thin CFRP SKIN, al Honeycomb Composites // 12th European Conference on Spacecraft Structures, Materials and Environmental Testing, Nederland, Noordwijk, 20.-23. March, 2012., European Space Agency, (Special Publication) ESA SP, 691 SP, (2012), 7 p. (SCOPUS).

Barkanov E., Eglitis E., Almeida F., Bowering M., Watson G. The Effect Investigation of Rib Attachment to Stiffener Webs in Terms of Buckling Behaviour // In: CD-ROM Proceedings of the 32nd Annual International Scientific-Practical Conference and Accompanying Exhibition “Composite Materials in the Industry”, Ukraine, Yalta, 4.-8. June, 2012. - pp 407-411.

Barkanov E., Skukis E. Characterisation of Frequency-Dependent Viscoelatic Material Properties via an Inverse Technique // In: CD-ROM Proceedings of the 20th International Conference and Exhibition “Modern Methods and Tools of Nondestructive Testing and Technical Diagnostics”, Ukraine, Yalta, 1.-5. October, 2012. - pp 248-254.

Kovalovs A., Barkanov J., Gluhih S. Scaling Problem of the Active Twsit of Helicopter Rotor Blades // In: CD-ROM Proceedings of the 32nd Annual International Scientific-Practical Conference and Accompanying Exhibition “Composite Materials in the Industry”, Ukraine, Yalta, 4.-8. June, 2012. - pp 417-423.

Akishin P., Barkanov E. Methods for Nondestructive Determination of Elastic and Dissipative Material Properties // In: CD-ROM Proceedings of the 20th International Conference and Exhibition “Modern Methods and Tools of Nondestructive Testing and Technical Diagnostics”, Ukraine, Yalta, 1.-5. October, 2012. - pp 276-282.

Labans, E., Kalnins,K. Non-Contact Measuring System ARAMIS for Sandwich Panels Research // In: Proceedings of the 16th International Students Conference - Human. Environment Technology, Latvia, Rezekne, 25. April, 2012. – pp 396-405.

Labans, E., Kalnins, K. Optimal Design Practice for Plywood Sandwich Panels // In: Proceedings of the 9th ASMO UK / ISSMO conference on Engineering Design Optimization, Ireland, Cork, 5.-6. July, 2012. - pp 83-91.

Labans E., Kalnins K., Bikovs A. Simulation of Mechanical and Thermal Properties for Sandwich Panels with Cellular wood Cores // In: The Eighth International Conference on Engineering Computational Technology: Civil-Comp Proceedings 100, Croatia, Dubrovnik, 4.-7. September, 2012. - pp 104-112.

Labans E., Kalnins K. Numerical Modelling and Experimental Validation of Dendrolight Cellular Wood Material // In: Proceedings of the 8th Meeting "Northern European Network for Wood Science and Engineering (WSE)", Lithuania, Kaunas, 13.-14. September, 2012. - pp 177-184.

Labans, E., Kalniņs, K. Numerical Modelling and Optimization of All-Plywood Sandwich Panels with Rib-Stiffened Cores // In: Proceedings of the 25th Nordic Seminar on Computational Mechanics, Sweden, Lund, 25.-26. October, 2012. – pp 197-200.

Skukis E., Akishin P., Barkanov J. Inverse Technique for the Viscoelastic Material Properties Characterisation // Scientific Proceedings of Riga Technical University, Construction Science, Vol.13, 2012, RTU press, pp 47-52.

Thesis/Abstracts of International Conferences (2012)



2011

Zike S., Kalnins K., Ozolins O. Experimental Verification of Simulation Model of Impact Response Tests for Unsaturated Polyester/GF and PP/GF Composites // Computer Methods in Materials Science. - Vol.11, Iss.1 (2011) pp 88-94.

Gluhih S., Kovalovs A., Tishkunovs A., Chate A. Flexural Modulus Identification of Thin Polymer Sheets // Journal IOP Conference Series: Material Sciences and Engineering (online). – Vol.23, Iss.1 (2011) pp 1-5 (SCOPUS).

Kovalovs A., Rucevskis S. Identification of Elastic Properties of Composite Plate // Journal IOP Conference Series: Material Sciences and Engineering. - Vol. 23, Iss.1 (2011) pp 1-7 (SCOPUS)

Zike S., Kalnins K., Ozolins O., Knite M. An Experimental and Numerical Study of Low Velocity Impact of Unsaturated Polyester/Glass Fibre Composite // Material Science (Medžiagotyra). - Vol.17, Iss.4. (2011) pp 384-390.

Labans E., Kalniņš K. Optimum Design Guidelines for Plywood Sandwich Panels // In: The Nordic-Baltic Network in Wood Material Science and Engineering (WSE): Proceedings of the 7th Meeting, Norway, Oslo, 26.-27. October, 2011. – pp 155 - 160.

Labans E., Kalniņš K. Plywood Sandwich Panels Experimental and Numerical Investigation // In: Proceedings of the15th International Student Scientific and Practical Conference: Human. Environment. Technologies, Latvia, Rēzekne, 27.April, 2011. – pp 122. - 130.

Zīke S., Kalniņš K. Impact Properties of Birch Veneer and Flax Fabric Bio-Composite // In: Proceedings of the15th International Student Scientific and Practical Conference: Human. Environment. Technologies, Latvia, Rēzekne, 27.April, 2011. – pp 270.-278.

Labans E., Kalniņš K. Numerical Versus Experimental Investigation of Plywood Sandwich Panels with Corrugated Core // In: Civil Engineering `11: 3rd International Scientific Conference, Proceedings, Vol.3, 2011, Latvia, Jelgava, 12.-13. May, 2011. – pp 159.-165.

Zike S., Kalnins K. Enchanced Impact Absorption Properties of Plywood // In: Civil Engineering`11: 3rd International Scientific Conference, Proceedings, Vol.3, 2011, Latvia, Jelgava, 12.-13. May, 2011. - pp 125.-130.

Akishin P., Wesolowski M., Barkanov E. Nondestructive Technique for Characterization of Nanocomposite Material Properties // In: Proceedings of the 31st Annual International Scientific-Practical Conference and Accompanying Exhibition “Composite Materials in the Industry, Ukraine, Yalta, 6.-10. June, 2011. - pp 243.-246.

Thesis/Abstracts of International Conferences (2011)



2009

Gluhihs S., Kovaļovs A., Čerpakovska D., Kalniņš M. A method for determining the elastic modulus of polymer materials by using thin-walled cylindrical specimens // International Baltic sea Region Conference Functional materials and nanotechnologies 2009, LATVIJA, Rīga, 31.marts-3. aprīlis, 2009. - 195-195. lpp.


2008

Barkanovs J., Gluhih S., Kovaļovs A. Optimal Design of the Active Twist for Helicopter Rotor Blades with C-Spar // Mechanics of Advanced Materials and Structures. - Vol. 15, Issue . (2008) 325.-334. lpp.

Barkanovs J., Gluhihs S., Kovaļovs A., Masarati P., Morandini M., Riemenschneider J., Wierach P. Design of Helicopter Rotor Blades with Actuators Made of a Piezomacrofiber Composite // Mechanics Of Composite Materials . - Vol. 44, No. 1,. (2008) 57.-64. lpp.

Gluhih S., Korjakins A., Popovs A., Tiškunovs A. Using FEM analysis for evaluation of lifetime of the turbine blades repaired by the different kinds of titanium and nickel alloys // Advanced Materials Research . - 47-50. (2008) 37.-40. lpp.

Apeins E., Balodis J., Berķis U., Bērziņa D., Bērziņš J., Kalniņš K., Liepiņa L., Šīrante i., Tirzīte D., Ūbele R., Ūbelis A., Zilāns A. Latvija EK 6. Ietvara programmā 2002-2006. - Rīga : Latvijas Zinātnes padome, Nacionālais kontaktupunkts, 2008. - 120 lpp.

Beitlers R., Jēkabsons G., Kalniņš K., Ozoliņš O. Stiklplasta paneļu optimāla projektēšana ar eksperimentālu validāciju // RTU zinātniskie raksti. 2. sēr., Būvzinātne. - 9. sēj. (2008), 51.-63. lpp.

Bisagni C., Cordisco P., Čate A., Eglītis E., Kalniņš K., Rikards R. Metamodels for the optimization of damage-tolerant composite structures // Proc. of 26th Congress of International Council of the Aeronautical Sciences (ICAS 2008), ASV, Anchorage, Alaska, 14.-19. septembris, 2008. - 1-7. lpp.

Abramovich H., Auziņš J., Bisagni C., Kalniņš K., Rikards R. Metamodeling Methodology for Postbuckling Simulation of Composite Stiffened Structures with Physical Validation // Proceedings of 2nd Int. Conference on Buckling and Postbuckling Behaviour of Composite Laminated Shell Structures with COCOMAT Workshop, VĀCIJA, Braunschweig, 3.-5. septembris, 2008. - 1-4. lpp.

Degenhardt R., Kalniņš K., Rikards R. Overview of Slow Computational and Fast Simulation Tools // Proc. of 2nd Int. Conference on Buckling and Postbuckling Behaviour of Composite Laminated Shell Structures with COCOMAT Workshop, VĀCIJA, Braunschweig, 3.-5. septembris, 2008. - 1-4. lpp.

Almeida F., Barkanovs J., Bowering M., Eglītis E., Gluhih S., Ozoliņš O., Watson G. Optimal Design of Composite Lateral Wing Upper Covers Based on Non-Linear Buckling Analysis. // Proceedings, 9th International Conference on Computational Structures Technology, GRIEĶIJA, Atēnas, 2.-5. septembris, 2008. - 295-308. lpp.

Jēkabsons G., Kalniņš K., Ozoliņš O. Metamodels in design of GFRP composite stiffened deck structure // Proceedings of 7th ASMO-UK/ISSMO International Conference on Engineering Design Optimization, LIELBRITĀNIJA, Bāta, 7.-8. jūlijs, 2008. - 1-11. lpp.

Barkanovs J., Čate A., Gluhih S. Buckling and Postbuckling behaviour of Polymer Tube under Hydrostatic Pressure // Book of Abstracts of XV International Conference on Mechanic of Composite Materials, MCM-2008, LATVIJA, Rīga, 26.-30. maijs, 2008. - 91-91. lpp.

Barkanovs J., Čate A., Skuķis E. Inverse Technique Based on the Planning of Experiments and Response Surface Methodology // Book of Abstracts, The International Conference on Inverse Problems: Modelling and Simulation, TURCIJA, Fethiye, 26.-30. maijs, 2008. - 22-23. lpp.

Barkanovs J., Gluhihs S., Kovaļovs A. Active Twist of Composite Rotor Blade // Book of Abstracts of XV International Conference on Mechanics of Composite Materials, LATVIJA, Rīga, 26.-30. maijs, 2008. - 148-149. lpp.

Eglītis E., Teters G., Kalniņš K., Ozoliņš O. Experimental and Numerical Study on dynamic buckling of cylindrical composite shells // Book of abstracts of XV International Conference Mechanics of Composite Materials, Mechanics of Composite Materials 2008, LATVIJA, Rīga, 26.-30. maijs, 2008. - 76-76. lpp.

Eglītis E., Jēkabsons G., Kalniņš K., Rikards R. Metamodels for optimum design of laser welded sandwich structures // Proceedings of International Conference on Design, Fabrication, and Economy of Welded Structures 2008, UNGĀRIJA, Miskolc, 24.-26. aprīlis, 2008. - 119-126. lpp.

Barkanovs J., Wesolowski M. The Role of the Experimental Error in the Inverse Technique Problem Based on Vibration Test // Proceedings, The 27th Seminar of the Student Scientific Assosciation of Mechanics, POLIJA, Varšava, 24.-25. aprīlis, 2008. - 297-310. lpp.

Čate A., Kalniņš K., Tirzīte D., Ūbelis A., Zilāns A. 7 - Ietvara Programmas atbalsts jūras transporta pētījumiem // Proc. of LMA 10th International Conference Maritime Transport and Infrastructure-2008, LATVIJA, Rīga, 24.-25. aprīlis, 2008. - 234-237. lpp.

Barkanovs J., Skuķis E., Wesolowski M. Passive Vibration Control in Frequency and Time Domains. // Proceedings of International Conference on Smart Materials and Adaptive Structures: Mathematical Modelling and Computation, MAROKA, Tangier, 14.-16. aprīlis, 2008. - 145-147. lpp.

Barkanovs J., Gluhihs S., Kovaļovs A. Active twist optimal design of full scale helicopter rotor blade // Proceedings of International Conference on Smart Materials and Adaptive Structures: Mathematical Modeling and Computation, MAROKA, Tangier, 14.-16. aprīlis, 2008. - 19-21. lpp.

Barkanovs J., Gluhihs S., Kovaļovs A., Skuķis E., Wesolowski M. Modal Analysis of Composite Plate // Proceedings of International Baltic Sea Region Conference Functional materials and nanotechnologies, LATVIJA, Rīga, 1.-4. aprīlis, 2008. - 89-89. lpp.

Abramovich H., Bisagni C., Cordisco P., Eglītis E., Kalniņš K., Rikards R. Metamodels for optimum design of composite stiffened structures under torsion loading // Proc. of 48th Israel Annual Conference on Aerospace Sciences, IZRAĒLA, Tel Aviv/Haifa, 27.-28. februāris, 2008. - 1-4. lpp.

Čate A., Kalniņš K. FP7 Transport Priority Analysis of the 1st call and Priorities for the 2nd Call // ISBN: 978-80-8070-808-5, Danube - 7th Pan-European Transport corridor – a new challenge for countries of Central Europe, SLOVĀKIJA, Žilina, 5. februāris, 2008. - 30-36. lpp.




2007

Barkanovs J., Gluhihs S., Kovaļovs A. Active Twist of Model Rotor Blades with D-spar Design // TRANSPORT. - Vol XXII , Nr 1. (2007) 38.-44. lpp.

Barkanovs J., Gluhihs S., Kovaļovs A. Numerical optimization of helicopter rotor blade design for active twist control // AVIATION. - Vol XI , Nr 3. (2007) 3.-9. lpp.

Eglītis E., Kalniņš K., Ozoliņš O., Rikards R. Numerical study of geometrical imperfection response on composite cylinders under axial loading // Proceedings of 20th Nordic Seminar on Computatuional Mechanics, ZVIEDRIJA, Goteborg, 23.-24. novembris, 2007. - 1-4. lpp.

Barkanovs J., Čate A., Ručevskis S., Skuķis E. Characterisation of Advanced Composite Material Properties by Inverse Technique. // RTU zinātniskie raksti. 1. sēr., Materiālzinātne un lietišķā ķīmija . - 1. sēj. (2007), 22.-38. lpp.

Barkanovs J., Gluhihs S., Kovaļovs A. Active twist performance for optimal design of helicopter rotor blade with D-spar // Proceedings of 4th international conerence: Strength, Durability and Stability of Materials and Structures, SDSMS'04, LIETUVA, Palanga, 11.-13. septembris, 2007. - 53-59. lpp.

Eglītis E., Kalniņš K. Benchmarking of FE post-buckling analysis of stiffened composite panels with experimental validation // Proceedings of 4th International Conference Strength, Durability and Stability of Materials and Structures SDSMS’04, LIETUVA, Palanga, 11.-13. septembris, 2007. - 32-38. lpp.

Barkanovs J., Gluhihs S., Kovaļovs A. Comparative study of optimal active twists for helicopter rotor blades with C and D-spars // Proceedings of 33rd European Rotorcraft Forum, European Rotorcraft Forum, KRIEVIJA, Kazan, 11.-13. septembris, 2007. - 1-11. lpp.

Čate A., Kalniņš K., Liepiņa L., Sauka I., Tirzīte D. Eiropas savienības atbalsts jūrniecības pētījumiem. // Proc. of LMA 9th International Conference Maritime Transport and Infrastructure-2007, LATVIJA, Rīga, 19.-20. aprīlis, 2007. - 255-272. lpp.




2006

Barkanovs J., Eglītis E., Gluhih S., Ozoliņš O. Ribotu kompozītu paneļu noturības analīze ar galīgo elementu metodi // RTU zinātniskie raksti. 2. sēr., Būvzinātne. - 7. sēj. (2006), 105.-112. lpp.

Kalniņš K., Sauka I. Eiropas Savienības atbalsts pētniecības un attīstības projektiem Latvijā - jūrniecības klasterī // LJA 8. Starptautiskā konferences krājums. Ūdens transports un infrastruktūra – 2006., LATVIJA, Rīga, 20.-21. aprīlis, 2006. - 5-11. lpp.


2005

Jēkabsons G., Kalniņš K., Skuķis E., Sproģis R. Metamodeļi nesošo gofrēta profila plātņu optimālai projektēšanai // RTU zinātniskie raksti. 2. sēr., Būvzinātne. - 6. sēj. (2005), 136.-145. lpp.

Auziņš J., Kalniņš K., Skuķis E. Methamodels for I-core and V-core type sandwich plate optimisation // Proceedings of 8th International Conference on Shell Structures Theory and Application, POLIJA, Jurata, 12.-14. oktobris, 2005. - 569-572. lpp.


2004

Kalniņš K., Skuķis E. I-Core Sandwich Panel Optimization Employing Different Plate Models // RTU zinātniskie raksti. 2. sēr., Būvzinātne. - 5. sēj. (2004), 148.-155. lpp.

Gluhihs S., Kovaļovs A. Platņu Vibrāciju Slāpēšana Izmantojot Piezoelectriskus Aktuātorus // RTU zinātniskie raksti. 2. sēr., Būvzinātne. - 5. sēj. (2004), 115.-122. lpp.


 


Riga Technical University